PRODUCTS
AM65x Industrial SoM
The AM65x Industrial SOM is an easy to use, compact, light-weight System on Module providing very high processing power for Industrial applications.
- Quad Cortex A53 processor with Dual-core ARM Cortex-R5F
- Supports up to 4GB DDR4 with 1GB ECCÂ and 32GB eMMC
- Linux, Helix Hypervisor, VxWorks and Android Support
- Multi-protocol support: ModBus, CANopen, ProfiNET, ProfiBUS, Ethernet/IP, EtherCAT, EnDAT/EQEP, CCLink IEField, cycle-by-cycle PWM control
- One Gigabit Ethernet PHY (CPSW)
- 6 x Gigabit Ethernet Ports (PRU_ICSSG)
- On-board power regulators and Reset circuitry
- Form Factor: 63 x 90mm
- Supports CAN, USB, SPI, UART, I2C and GPIOs Interface
- Time-Sensitive Networking (TSN) support
mmWave Radar Technology
Based on Texas Instruments' AWR and IWR mmWave Radar sensors, Mistral's mmWave Radar modules are compact, light-weight RADARs providing superior functionalities for Industrial, Robotics, Healthcare, and Automotive applications.Â
- FMCW Transceiver with Integrated PLL, Transmitter, Receiver, Baseband and ADC
- 60-64GHz and 76-81GHz Coverage with 4GHz Continuous Bandwidth
- Four Receive Channels and Three Transmit Channels
- Built-in Calibration and Self-test
- ARM® Cortex® R4F-Based Radio Control System
- Hardware Accelerator for Signal Processing (FFT, Filtering and CFAR Processing)
- C674x DSP for FMCW and Advanced Signal Processing
- Supports TI SDK 3.03 (60GHz Aop and 77GHz AoPCB) and SDK 3.02 (60GHz AoPCB)
- Sensor Fusion Kit supports CSI2 Camera
- Fixed and floating-point TMS320C66x digital signal processor (DSP) generation cores
- Vision AccelerationPac (EVE)
- Dual-Cortex-M4 processors
AM437x PoM
The AM437x POM is a low cost, small footprint, high performance; easy-to-use Product on Module
built around the powerful 800MHz/1GHz Sitara AM437x SoC from Texas Instruments.
- 800MHz/1GHz ARM Cortex-A9 processor with multi core PRU-ICSS
- WiFi + BT module with Antenna
- 1 GB DDR3L Memory with Micro SD Card Slot
- HDMI output support
- USB & DC powered
- PMIC to power processor, memory and other peripherals
- Dimension: 125mm X 85mm
- Expansion headers:Â LCD, CAM, Ethernet, CAN, I2C, SPI, ADC, PWM, McASP, MMC etc.
- USB 2.0 OTG and Host
- 2 x Gigabit Ethernet
- Audio In/Out
RTM-Break-out Card
The Rear-transition Module – Breakout Card (RTM-BOC) is an eight layer plug-in module for the Keystone II family of Edison, Hawking and Kepler EVMs
showcasing the multi-core DSP+ARM KeyStone II System-on-Chips from Texas Instruments.
- Eight-layer PCB with IT168 dielectric material for high speed data support
- Fully Open Source Linux Board Support Package
- Two port (Each port of 4 lanes) Hyperlink interface
- Four lane 2 Generation Antenna interface (AIF2)
- XFI interface
- Quad port PHY
- 10/100/1000 Mbps data rate support
- Two dual port RJ45 connectors with integrated magnetics and LEDs
- Two Hard Metric ZD type μTCA connectors
- Power from onboard +12V DC jack or power from EVM board through μTCA connector.
SERVICES
We offer a wide array of product design, custom hardware design
and software development services on TIs ARM SitaraTM, Media Processors,
mmWave RADAR Chipsets, and DSP platforms.
- Product Design Services
- Hardware Design Services
- Firmware and BSP
- Audio & Video
- Test & Validation
- Production Support
APPLICATIONS
Wearable Electronics
Medical Electronics
Industrial Gateways
Home Automation
Assistive Devices
ePOS
Biometrics
ADAS
RESOURCES
-
Related Product
77GHz AoPCB Automotive RoM
-
Related Product
AM65x Industrial SOM
-
Related Product
60GHz ES2.0 AoP Module
-
Related Product
60GHz ES2.0 AoPCB Module
-
Related Product
AM437x PoM
-
Related Product
Sensor Fusion Kit
-
Blog
ARM Technologies and its significance in Embedded Domain
-
Related Topic
Product Design Services
-
Application Note
Digital Signage Solution using TMDXEVM8148
-
Case Study
Modular Industrial Gateway
-
Technical Article
Vital Sign Monitoring using mmWave Radar
-
Webinar
mmWave Technology Webinar
-
Application Note
Industrial Robotics Control Unit
