The VPX backplane from mistral is of 6U size with 12 slots. The PCBs intended for the backplane are the TMS board, PPC board and Switch board. The Backplane will carry the signals from these boards onto the rear side connectors of the backplane.

This VPX backplane from mistral is of 6U size with 10 slots. The VPX backplane is designed to host Intel boards and Ethernet Switch boards. The VPX backplane will bring out the I/O signals from these boards onto the rear side connectors of the VPX backplane.

This VPX backplane from Mistral is of 6U size with 10 slots. The VPX backplane is designed to host Intel boards and Ethernet Switch boards.

6U OpenVPX Backplanes supporting VITA 66.4 optical, 67.1 RF and 67.3 RF/Optical modules. These backplanes are available in VME / VPX hybrid versions supporting legacy boards and the latest VPX boards.

3U OpenVPX Backplanes supporting VITA 66.4 optical, 67.1 RF and 67.3 RF/Optical module and are available in VME / VPX hybrid versions supporting legacy boards and the latest VPX boards.

The XF07-RLDRAM high-performance user-programmable FPGA XMC from Curtiss Wright supports both fast DDR3 SDRAM and RLDRAM memory banks for FPGA-based co-processing applications

The CHAMP-FX7 from Curtiss-Wright Defense Solutions is a rugged, high performance, adaptable real-time processing board featuring AMD’s groundbreaking Versal Adaptive SoC devices.

The VPX3-534 from Curtiss Wright is a high-performance single slot RF digitizing transceiver with two 6 Gsps 12bit ADC channels, also configurable as four 3 Gsps ADC channels, and two 6 Gsps very low latency DAC channels.

Designed for superior durability and reliability, the VPX3-E320 incorporates Curtiss-Wright’s industry-leading rugged hardware design and validation practices to meet the stringent requirements of the most demanding front-line environments.

Rugged Kintex-7 FPGA based XMC with digital IO is ideal for demanding applications including radar, imaging and test equipment across commercial and defense market spaces and SWaP constrained platforms such as UAVs and fighter aircrafts.

Quad 500MSPS 14b Kintex-7 XMC Digital Receiver ideal for demanding applications including radar, imaging and test equipment across commercial and defense market spaces.

Quad 250MSPS 16b Kintex-7 XMC Digital Receiver that directly interfaces to a user programmable Xilinx FPGA which allows high performance processing such as Digital Down Conversion (DDC), filtering and custom algorithms.

3U VPX Virtex-7 FPGA rugged form-factor ADC/DAC is ideal for SWaP constrained platforms such as UAVs, fighter aircraft and ground vehicles.

The rugged XMC-4902 NVIDIA Quadro Pascal GP107 processor mezzanine module from Curtiss Wright is designed and manufactured by Wolf Advanced Technology. The board is part of a family of GPU modules available from Curtiss-Wright Defense Solutions to enable the development of High-Performance Embedded Computing (HPEC) systems.

The rugged VPX3-4924 NVIDIA Tesla Pascal GPU processor board from Curtiss Wright is designed and manufactured by Wolf Advanced Technology. This board is part of a family of GPU modules available from Curtiss-Wright Defense Solutions to enable development of High-Performance Embedded Computing (HPEC) systems

The rugged 3U OpenVPX™ form factor VPX3-493 from Curtiss Wright supports NVIDIA’s size, weight, power and cost (SWAP-C) optimized 2.6 TFLOPS T1000 GPU devices. The VPX3-493 is designed to work with Intel® processor-based single board computers (SBC) such as the Curtiss-Wright VPX3-1260 8th Gen Xeon board.

The VPX3-4935 3U VPX GPU processor card from Curtiss Wright delivers incredible processing power from its NVIDIA Quadro Turing TU104 GPU, providing an impressive 3072 CUDA cores for parallel processing and a 50% improvement in performance per CUDA core compared to the previous Pascal generation.

The VPX6-4955 from Curtiss Wright delivers incredible processing power from not one, but two NVIDIA Quadro Turing TU104 GPUs, providing a remarkable 6144 CUDA cores for parallel processing and a 50% improvement in performance per CUDA core compared to the previous Pascal generation. 

The VPX3-534 from Curtiss Wright is a high-performance single slot RF digitizing transceiver with two 6 Gsps 12bit ADC channels, also configurable as four 3 Gsps ADC channels, and two 6 Gsps very low latency DAC channels.

The XMC-603 PMC module from Curtiss Wright allows customers to readily incorporate MIL-STD-1553 into military and aerospace embedded computing systems. As one of several products in our comprehensive range of rugged XMC modules, the XMC-603 integrates well with other elements of our product line, featuring technical support, lifecycle management services, and assured long-term availability.

Based on Intel®'s popular XL710 Ethernet Converged Network Adapter, the XaMC-E01 from Curtiss Wright delivers four independent channels of 10 GbE while it's unique "pigtail" cable feature mitigates the need for custom modifications and provides ease of access for service or upgrades.

Virtex-5 XMC/PMC combines data processing and I/O in a single module The XMC-FPGA05F is available in PMC only, XMC only, or a combined PMC/XMC formats.

Multi-Channel Clock Generator is an ideal source for analog to digital converter sample clock for DSP applications because it was designed with embedded computing in mind by providing a clock source, with up to six phase matched outputs, packaged in a convenient PMC or XMC board form factor.

6U VPX Carrier Card provide tremendous flexibility in the range of modules supported - from the latest generation high-performance XMC utilizing 8-lane PCIe links to older generation standard PMCs - including those that use 5V signaling.

3U VPX Virtex-7 FPGA rugged form-factor ADC/DAC is ideal for SWaP constrained platforms such as UAVs, fighter aircraft and ground vehicles.

3U VPX Carrier Card for PMC/XMC Modules are available in levels 0 and 100 air-cooled and in levels 100 and 200 conduction-cooled variants.

4-channel 1000 MSPS analog output FPGA Mezzanine Card (FMC) based on the VITA 57 specification ideal for a wide range of applications like Software Radio, Electronic Counter Measures (ECM), Radar, w Broadband Wireless Access (BWA) and WiMAX 802.16.

A Quad 500MSPS 14-bit ADC FMC providing high-speed, low latency, high-performance functionality necessary for applications such as Signal Intelligence (SIGINT), Electronic Warfare (EW) and RADAR.

Quad 250MSPS 16b ADC FMC that provides low latency, high-performance functionality necessary for applications such as Signal Intelligence (SIGINT), Electronic Warfare (EW) and RADAR.

The XMC-4701 rugged video capture XMC module from Curtiss Wright is designed for high-performance video ingest applications. The XMC module can capture up to four simultaneous video streams from analog and digital sources, with a high-speed DMA-driven capture engine.

The XMC-4730 from Curtiss Wright is a rugged NVIDIA Quadro Pascal GP107-based video processing mezzanine module designed for high-performance video ingest, processing, and display applications.

Rugged, High-performance DO-254 and DO-178C Safety Certifiable 3U VPX/OpenVPX AMD E8860 Graphics and Video Capture Module

6U OpenVPX GPGPU Processor Card based on industry-standard MXM modules, is fitted with a pair of 240 core GPU devices each with 2GB of GDDR5 memory

An industry-leading rugged 3U VPX/OpenVPX, high performance graphics processor based on the AMD Radeon E8860 GPU especially well-suited to support embedded training, moving maps, GIS, DVE and other graphics, video and compute-intensive applications.

3U OpenVPX GPU Application Accelerator

IEEE 1386.1-compliant Dual Output Graphics PMC module is ideal for Avionics cockpit displays, Helmet Mounted Displays (HMD), Heads Up Displays (HUD), command and control and digital moving maps applications among others.

Dual Input Output Graphics PCI Mezanine Card based on the AMD RADEON MOBILITY 9000 (M9) that supports both legacy and current video interfaces, making it an ideal solution for both new and retrofit ground, naval and avionics platforms.

3U OpenVPX Intel Ice Lake Xeon D-1700 DSP Processor Card, with Zynq® UltraScale+™ MPSoC FPGA for enhanced security, ideal for Digital Signal Processing, HPEC, Cognitive DSP, AI & Machine Learning in compute-intensive aerospace and defense applications.

3U VPX Data Processing Engine based on Xilinx Zynq Ultrascale+ RFSoC Gen3 integrates multi-gigasample RF data converters and soft-decision forward error correction (SD-FEC) into an SoC architecture.

3U VITA-46 VPX Data Processing Engine based on Xilinx Zynq Ultrascale+ RFSoC Gen3 integrates multi-gigasample RF data converters and soft-decision forward error correction (SD-FEC) into an SoC architecture.

For highly compute-intensive Industrial, Aerospace, and Defense applications where security is critical, the CHAMP-XD1S Digital Signal Processor (DSP) provides enhanced Trusted Computing features alongside leading-edge processing technology for unmatched performance.

6U OpenVPX GPGPU Processor Card based on industry-standard MXM modules, is fitted with a pair of 240 core GPU devices each with 2GB of GDDR5 memory

3U OpenVPX GPU Application Accelerator

6U OpenVPX Intel Xeon D DSP Processor Card available in a range of ruggedized configurations to deliver optimal performance in the harshest deployed environments, including air-cooled and conduction cooled variants.

3U VPX Intel Xeon D DSP Processor Card that combines the high core count and floating-point performance of the latest Intel Xeon D processors with the substantial bandwidth and system-enabling features of the VITA 3U OpenVPX form factor.

An Intel Core i7 4th Gen based Digital Signal Processor Card with the substantial bandwidth and system-enabling features of the 6U OpenVPX form-factor, available in rugged air-cooled and conduction-cooled versions. 

VPX6-197 from Curtiss Wright is an OpenVPX-compliant 6U SBC that combines the performance and the advanced I/O capabilities of the NXP’s quad-core AltiVec-enabled T2080 processor. Designed for space-constrained applications, the VPX6-197 combines the processing power of quad-core dual threaded 64-bit AltiVec-enabled non-throttling computing with a rich I/O complement.

The VME-196 from Curtiss Wright combines the performance and the advanced I/O capabilities of the NXP quad-core AltiVec enabled T2080 processor. The VME-196 is supported by Curtiss-Wright’s U-Boot, Green Hills INTEGRITY, Lynx Software Technologies LynxOS, Yocto NXP SDK-based Linux and Wind River VxWorks 6.9 and 7 Board Support Packages (BSPs) and driver suite

Leveraging Intel’s first-ever embedded Xeon six-core processor with integrated graphics, the VME-1910 from Curtiss Wright is designed to deliver over 60% more processing power than previous four-core designs, and a whopping 35x the performance of Intel’s original Core2Duo processor

The CHAMP-XD4 6U OpenVPX™ rugged processor card is designed for use in very compute-intensive industrial, and aerospace and defense applications, enabling developers of High-Performance Embedded Computing (HPEC) systems to take full advantage of the unmatched performance of today’s leading-edge Intel Ice Lake D architecture

The VPX3-1708 single board computer from Curtiss Wright delivers the next step in performance while maintaining a similar power envelope to previous NXP processor generations. Available in a safety-certifiable variant, the V3-1708, this COTS processor card is designed to reduce the time, cost, and risk associated with getting rugged, safety-critical systems to the field.

The VPX3-1220 from Curtiss-Wright is a high-performance single board computer (SBC) featuring the 7th Generation Intel Kaby Lake Xeon processor. Pin-compatible with the previous generations of Intel SBCs, the VPX3-1220 offers powerful Intel processing in the small 3U form factor and is specifically designed with low-power technologies to meet today’s size, weight, and power (SWaP) challenges.

The VPX3-1262 from Curtiss-Wright Defense Solutions is a rugged, high performance 3U OpenVPX™ Single Board Computer (SBC) designed to meet the demanding performance needs of next-generation SOSA Aligned processing systems

Rugged, high-performance 6U OpenVPX Intel Xeon W Single Board Computer (SBC) excels in harsh environments, making it ideal for architecting high-performance computing and processing systems.

The VPX3-673A from Curtiss Wright is a rugged 3U OpenVPX™ A-PNT module designed to ingest positioning data from multiple sensors and output consistent timing and navigation information to the warfighter

The VPX3-1707 is an OpenVPX™ compliant 3U single board computer (SBC) offering incredible processing capability at remarkably low power.

Safety-certifiable SBC from Curtiss-Wright that offers advanced I/O capabilities, high-density computing in the smallest standard form factor with the lowest power possible.

High Performance 3U OpenVPX, DO-254 / DO-178C safety-certifiable SBC built around NXP Layerscape LS1043A ARM quad-core A53 processor with advanced I/O capabilities

Rugged 3U OpenVPX single board computer (SBC) featuring 8th Gen Intel Xeon processor with integrated graphics to deliver a fully-featured, all-in-one processing solution

Rugged, high performance 6U OpenVPX Intel Core i7 Broadwell Single Board Computer (SBC) excels in harsh environments, making it ideal for architecting high performance computing and processing systems.

6U VPX SBC with NXP Power Architecture P4040/4080 Processor is targeted at the challenging data and digital signal-processing needs of tactical aircraft, armored vehicles and harsh environment naval systems.

6U VPX SBC with Dual NXP Power Architecture 8640 Processors provides high performance VPX processing and a long list of features and I/O interfaces to satisfy the most demanding requirements of embedded computing.

3U VPX SBC with NXP Power Architecture T2080 Processor is up to the challenging task of delivering high density computing that packs the greatest functionality into the smallest standard form factor.

3U VPX SBC with NXP Power Architecture P4080, an extensive I/O and INTEGRITY, LynxOS, Linux, and VxWorks support provides a highly capable processing platform for a wide range of rugged, embedded military and aerospace applications.

3U VPX Intel Core i7 Broadwell SBC with up to 32 GB of high speed SATA flash memory, is ideal for handling complex applications with demanding sensor processing requirements, or high speed data processing, logging and storage needs.

Low-cost, high performance, high speed DDR3 memory 6U VME Single Board Computer based on the 4th Generation Core i7 "Haswell" Processor, with VxWorks 6.9, WES7, LynxOS and Fedora Core BSPs.

6U VITA-46 VPX Intel SBC (Intel ATOM SBC) based on E640T Intel ATOM Processor that combines high-performance, low power architecture with various I/O capabilities.

A Quad Power Architecture Digital Signal Processing Engine that utilizes the 6U VPX-REDI format with eight NXP Power Architecture MPC8640 processor cores (four 8640D dual-core processors).

The VPX3-687 from Curtiss wright is a versatile and high-performance Ethernet switch designed to connect the next generation of 3U systems.

The Curtiss-Wright VPX3-655 is a very versatile Ethernet switch supporting 1G, 10G and 40G ports, including 12x 10GBASE-T ports, providing high-speed connectivity for modular embedded computing applications.

The VPX3-663 hybrid switch from Curtiss Wright combines PCI Express 3.1 and 10 Gigabit Ethernet switching in a single 3U VPX modulae.

The versatile, high-performance VPX3-6826 Ethernet switch from Curtiss Wright provides rugged Ethernet switching for the next generation of 3U systems. It is developed in alignment with the Sensor Open Systems Architecture™ (SOSA) Technical Standard to ensure interoperability with today’s latest VPX systems.

Designed to provide a complete networking solution for VPX systems. Curtiss-Wright VPX6-688 Gigabit Ethernet switch is ideal for a wide range of embedded computing and vehicle network applications.

Fully-featured Gigabit Ethernet Switch designed to provide complete networking solution for VME systems. Suitable for a wide range of embedded computing and vehicle network applications, the VME-690 provides 20 ports of standards compliant 1000BASE-T Gigabit Ethernet to the VME backplane.

6U OpenVPX Serial RapidIO and Ethernet Switch is a combined management, control and dataplane switch for small, mid-size and large 6U VPX systems.

24-port Serial RapidIO (x4) Switch to the VPX backplane enabling systems integrators to architect small to large high-performance systems following guidelines provided in the VITA 65 (OpenVPX) systems specification

A combined Data Plane and Control Plane high-performance Switch for small, mid-size and large 6U VPX systems. The VPX6-6802 Data Plane fabric supports both Ethernet and InfiniBand protocols.

A fully-featured Layer-2/3 3U VPX 14/17/20-port + 2x 10GbE Managed Ethernet Switch & Secure Router with a highly integrated security subsystem

Low Power 3U VPX 20-port fully featured Layer-2 managed Ethernet switch that provides up to 20 ports of copper Ethernet connectivity designed to support advanced network architectures for the defense industry.

12-port Rugged Gigabit Ethernet Mezzanine Switch that support "in-chassis" networks with managed Layer-2 switching capabilities. The XMC-651 XMC/PMC Ethernet Switch is an ideal low cost zero-slot Ethernet switching solution that can be added to any basecard with an XMC/PMC mezzanine slot.

Scade One is a model-based solution for developing embedded applicative software, enabling a seamless Model-Based Systems Engineering (MBSE) process.

Ansys Twin Builder is an open solution that allows engineers to create simulation-based digital twins with Hybrid Analytics.

Predicts the illumination and optical performance of systems to save on prototyping time and costs while improving product’s efficiency.

An efficient web-based project requirements management tool for complex systems providing a scalable solution to optimize communication, collaboration and verification of requirements.

Predictive validation of vehicle systems such as intelligent headlamp units, sensors, human-machine interfaces (HMIs) for ADAS and AD with a visually realistic, real-time and interactive driving simulator, sound dimension and physics-based simulation.

Complete suite of developer tools for software running on Wind River platforms, including end-to-end, open standards–based suite for device software design, development, debugging, test, and management.

Boosts application performance, reduces memory footprint, and produces high-quality, object code in environments where conformance and compliance to safety standards is a must.

Integrated design environment for critical applications including requirements management, model-based design, simulation, verification, qualifiable/certified code generation and interoperability with other development tools and platforms.

Design and prototype of ARINC 661 compliant systems, embedded Cockpit Display Systems (CDS) and User Applications (UA) with the SCADE Solutions for ARINC 661 and significantly decrease overall avionics software development and modifications costs.

Systems and Software Lifecycle Management software features requirements traceability via application lifecycle management (ALM) tools, traceability from models, configuration and change management, and automatic documentation generation.

Design robust embedded displays for human machine interfaces with native support for the OpenGL® SC1 & SC2 (Safety Critical) and ES1 & ES2 (Embedded system) standards

Ideal environment for any high-reliability / safety-critical embedded application, GNAT Pro Safety-Critical facilitates formal compliance with domain-specific safety standards like RTCA DO-178B / DO-178C.

Powerful and simple-to-use Integrated Development Environment (IDE) with extensive navigation and analysis tools to generate a variety of useful information including call graphs, source dependencies, project organization, and complexity metrics.

Includes an Ada front-end, the GCC code generator, the binder, linker, and run-time library. The software has the ability to build standalone static and dynamic libraries ad provides interfacing to C, C++, and Java.

Automated Code Review and Validation Software that assesses potential bugs before program execution, serving as an automated peer reviewer, helping to find errors efficiently and early in the development life-cycle.

A NAND Flash Controller that provides easy access to ONFI 3.0 NAND Controller over an 8-bit wide interface to handle multiplexed command, address and Write/Read data sequences.

A Fast Fourier Transform Algorithm allows implementation of very long transforms on an FPGA using external RAM. The FFT IP Core from Mistral is designed for Run time Programmability and Optimal Resource Utilization.

A wide-band Digital Down Converter FPGA IP Core on Xilinx and Altera platforms that provides DSP logic required to down convert a desired frequency band. The Digital Down Converter FPGA Core is ideal for digital receivers used in defense and aerospace applications.

Connext DDS Secure is the trusted connectivity framework for developing and integrating secure, real-world systems. It protects systems through flexible, fine-grained security for optimal performance and efficiency, from device to cloud.

Fast, secure and interoperable data communications infrastructure for LabVIEW providing extremely low latency, high throughput and seamless communication over shared memory, LAN, WAN and internet.

Fast, scalable and resilient software connectivity platform for accelerated distributed application development and existing device integration that includes a rich set of connectivity capabilities optimized for IIoT systems.

Connectivity framework for Resource-Constrained IOT Applications that have minimal memory, CPU power or no operating system and is scalable from embedded 16-bit microcontrollers to multicore 64-bit CPUs.

Safety-Certifiable Connectivity Platform for safety and mission-critical Industrial IoT systems, based on the Object Management Group (OMG) Data Distribution Service (DDS) standard, with small memory footprint, bunled source code, and DO-178C Level A Certification Package.

RTOS for safety-critical applications that require RTCA DO-178, EUROCAE ED-12, or IEC 61508 certification evidence in a single integrated environment, with complete platform integration, including powerful tools for debugging, code analysis, and test.

Complete multi-core ARINC 653–compliant platform for the IMA marketplace provides robust time and space partitioning to ensure fault containment and the ability to upgrade applications with minimal test and integration demands.

The market-trusted, Yocto Project Compatible open source baseline delivers vital components for the productization and commercialization of any Internet of Things (IoT) device.

Simplifies building of next generation of intelligent, connected vehicles by providing comprehensive cloud-based connectivity, foundation for security, and modular flexibility.

Advanced middleware features and protocols for specific industries including industrial, medical, consumer, networking and Internet of Things (IoT).

Industry’s leading real-time operating system for building embedded devices and systems. Its rich functionality helps our customers deploy innovative products while lowering costs and shortening production cycles.

Provides manufacturers of electronic components and systems in aerospace domain with dedicated support for functional safety analysis

RTOS for safety-critical applications that require RTCA DO-178, EUROCAE ED-12, or IEC 61508 certification evidence in a single integrated environment, with complete platform integration, including powerful tools for debugging, code analysis, and test.

Complete multi-core ARINC 653–compliant platform for the IMA marketplace provides robust time and space partitioning to ensure fault containment and the ability to upgrade applications with minimal test and integration demands.

Integrated design environment for critical applications including requirements management, model-based design, simulation, verification, qualifiable/certified code generation and interoperability with other development tools and platforms.

Design and prototype of ARINC 661 compliant systems, embedded Cockpit Display Systems (CDS) and User Applications (UA) with the SCADE Solutions for ARINC 661 and significantly decrease overall avionics software development and modifications costs.

Systems and Software Lifecycle Management software features requirements traceability via application lifecycle management (ALM) tools, traceability from models, configuration and change management, and automatic documentation generation.

Design robust embedded displays for human machine interfaces with native support for the OpenGL® SC1 & SC2 (Safety Critical) and ES1 & ES2 (Embedded system) standards

Handheld system for the real-time detection and location of buried and hidden objects like Anti-tank Mines, Anti-personnel Landmines (metal and non-metal) and IEDs in variety of soil conditions such as Sand, Red, Laterite, and Black Cotton.

Portable handheld RADAR used for the detection and location of static and/or moving targets, especially humans behind solid barriers or walls.

Compact T/R Modules designed for Phased Array RADARS operating in S-Band based on GaN (Gallium Nitride) technology. Delivers high efficiency in a compact size with a 100W Peak Transmit Power Capability per channel.

An S-Band based Dual Transmitter and Receiver Module with a GaN based Power Amplifier that helps reduce the size and complexity of the overall amplifier module while ensuring increased efficiency and high-power operation of a radar system.

Provide all oscillator requirements for C-Band RADAR system using DDS techniques. With the power supply modules built into the system, the entire box is self contained with connector for 28V input power connector.

The Multi-Platform Mission Computer MPMC-9365 mission computer is a leading-edge, flexible and rugged processing system that can be readily configured to meet any military or aerospace requirement.

MPMC-961x Application Ready COTS rugged integrated system is the perfect solution to modularly expand capabilities on any system.

The MPMC-965x is an integrated information processing system, providing complete hardware and software solutions.

The MPMC-9366-0001 Multi-Purpose Modular Computer is a flexible, high-performance, RF-capable processing system packaged in a rugged enclosure for military and aerospace environments deployment.

The MPMC-9337 packs high-performance Intel® and NVIDIA® processing into a highly rugged 3U OpenVPX™ chassis, for deployed GPGPU-based signal/image processing applications that require additional onboard processing power, but must limit their size, weight and space (SWaP) burdens.

The Parvus DuraCOR 313 is an ultra-small form factor (USFF) rugged embedded computer based on a low-power, quad-core Intel Atom x6400E Series (Elkhart Lake) processor equipped with unparalleled modularity for add-on I/O cards and data storage in a fanless IP67-rated miniature design.

The Parvus DuraCOR 312 is an ultra-small form factor (USFF) modular mission computer built around the high-performance, yet power efficient NVIDIA Jetson TX2i supercomputer-on-a module integrated in a miniature rugged chassis.

The Parvus DuraCOR 311 is an ultra-small form factor (USFF) rugged embedded computer/controller based on a low-power, quad-core Intel Atom E3845 (Bay Trail-I) processor equipped with a rugged Flash disk and PCIe-Mini Card I/O expansion slots.

Optimally designed for size, weight, and power (SWaP)-sensitive mobile, airborne, ground, sea vehicle and sensor applications, the Parvus DuraCOR 8043 combines powerful graphics and multi-core processing with ultra-reliable modular, mechanical robustness in a fanless IP67 design optimized for demanding civil and military platforms.

Featuring military-grade ruggedization in a fanless IP67 aluminium enclosure, the DuraCOR AGX-Xavier enables system integrators to harness the supercomputer-class capabilities of the NVIDIA Jetson AGX Xavier module.

Multi-platform Modular, Rugged 3U 5-slot Mission Computer that supports OpenVPX architecture. It can be readily configured to meet the needs of any military or aerospace requirements, from benign laboratory to harsh avionics environments.

Compact Signal/Image Processing 3-slot 3U VPX™ System in a rugged enclosure providing 500GFLOP* performane with a quad core Intel Core i7 processor with NVIDIA Fermi GPGPU capabilities.

The DTS1X is a rugged ready to deploy data-at-rest network attached file server that supports a 10 GbE interface with removable memory and two layers of encryption.

The Data Transport System 3-slot (DTS3) is a rugged Network Attached Storage (NAS) file server for use in mobile vehicles, field ground stations, and aircraft.

With two multi-core Intel® Xeon® D processors
and two 40 Gigabit Ethernet (GbE) ports, the HSR40 can handle the most demanding sensor recording applications.

The High-Speed Recorder 10 (HSR10) is a commercial off-the-shelf (COTS) high-speed network recorder and NAS device for use in 10 GbE architectures that demand high data throughput.

Rugged, high-performance, reliable and power-efficient NAND flash State Drive (SSD) solution designed for defense and industrial applications.

MIL-rugged 26-port Cisco IOS®- managed L2/L3 embedded Ethernet switch to operate in the harshest deployed military, aerospace, and industrial applications.

Rugged 16-port Managed Gigabit Ethernet Switch System with a power-efficient switching fabric providing non-blocking wire-speed gigabit performance for 16 ports of 10Mbps, 100Mbps or 1000Mbps Ethernet connections.

Ultra-small form factor (SFF), rugged, Commercial Off the Shelf (COTS) 8-port Gigabit Ethernet (GbE) switch optimized for extremely demanding size, weight and power (SWaP) constrained vehicle and aircraft platforms.

Ethernet Switch and Vehicle Management Computer built around a small and lightweight rugged chassis, provides 16 ports of tri-speed 10/100/1000Base-T Ethernet with a variety of flexible network switching features such as VLANs, multicast, and Quality of Service.

Multi-channel PCM encoder with 1W transmitter, 1.5Ah Li-ion battery pack and 11-channel MEM sensor measures 60mm x 60mm x 80mm, and is smaller than a coffee mug.

Multi-channel PCM encoder for a power range of 1W to 2W telemetry application, The Integrated Telemetry System integrates multi-channel PCM encoder, 1W transmitter, Transmitter antenna and 30 sensors of different types.

Microcontroller and FPGA based telemetry system that supports up to 62 electrical channels over voltage and short circuit protection, expandable up to 256 channels, with two 1553B channels.